Internet Connection Setup Wizard - D-Link DCS-936L User Manual

Section 3 - Configuration
Note: Use this wizard if you are connecting the camera directly to a public IP address. If you are
connecting the camera to a router, select DHCP Connection (most common) or select Static
IP Address to manually assign the camera its IP settings.
Step 1
The Internet Connection Setup Wizard will guide you through a step-by-step process to configure
your DCS-936L and connect it the Internet. Click Next to continue.
Step 2
Select DHCP Connection (Dynamic Host Configuration Protocol) if you want your DHCP
server (usually enabled on your router) to assign the camera its IP settings.
If you want to manually assign the IP settings, select Static IP Address and enter the
following details:
IP Address: Enter an IP Address for your camera.
Subnet Mask: Enter the Subnet Mask of your network.
Default Enter the Default Gateway address. This is usually the IP
Gateway:
address (LAN) of your router.
Primary DNS:
Enter the primary DNS server's IP address. This is usually also
the IP address (LAN) of your router.
Secondary DNS:
Enter the secondary DNS server's IP address. This is optional.
D-Link DCS-936L User Manual

Internet Connection Setup Wizard

20