Download Print this page

D-Link DCS-900 Quick Installation Manual

Hide thumbs

Advertisement

This product can be set up
This product can be set up
This product can be set up
This product can be set up
This product can be set up
using any current Web browser,
using any current Web browser,
using any current Web browser,
using any current Web browser,
using any current Web browser,
i.e., Internet Explorer 6.0 or
i.e., Internet Explorer 6.0 or
i.e., Internet Explorer 6.0 or
i.e., Internet Explorer 6.0 or
i.e., Internet Explorer 6.0 or
Netscape Navigator 7.0
Netscape Navigator 7.0
Netscape Navigator 7.0
Netscape Navigator 7.0
Netscape Navigator 7.0
Before You Begin
You must have at least the following:
Existing 10/100 Mbps Ethernet-Based Network
CD-ROM Drive
Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice. DCS-900.09182003
One DCS-900 Internet Camera
One Installation CD-ROM (containing
Drivers, Installation Guide, Software, and
Manual)
One Camera Stand
One Category 5 Ethernet Cable
• One AC Power Adapter
DCS-900
DCS-900
DCS-900
DCS-900
DCS-900
Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Fast Ethernet
Internet Camera
Internet Camera
Internet Camera
Internet Camera
Internet Camera

Advertisement

loading

  Also See for D-Link DCS-900

  Related Manuals for D-Link DCS-900

  Summary of Contents for D-Link DCS-900

  • Page 1 One Camera Stand • One Category 5 Ethernet Cable • One AC Power Adapter ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DCS-900.09182003...
  • Page 2: System Requirements

    Hardware Installation Attach the Swivel Stand Locate the stand connector on the bottom panel of the DCS-900 and screw on the swivel stand to the base of the DCS-900. Attach the External Power Supply Attach the external power supply to the DC power input connector located on the rear panel of the DCS-900 and connect it to your local power supply.
  • Page 3: Running The Setup Wizard

    Running the Setup Wizard You are now ready to run the Setup Wizard, which will guide you quickly through the installation process. Insert the D-Link DCS-900 Driver CD into your CD-ROM drive. Click Install Wizard Click Next Click...
  • Page 4 Running the Setup Wizard (continued) Click Next Click Finish To run the Setup Wizard, click on Start->Programs->DCS-900 Series SetupWizard. Your camera’s IP Address will be displayed here if it is valid. Click Wizard to begin...
  • Page 5 Running the Setup Wizard (continued) You must change the Admin ID and Password immediately to protect your camera against unauthorized access. By default, the Admin ID and Password are blank. To change the Admin ID and Password, select both Change boxes and enter a New ID and New Password.
  • Page 6 Running the Setup Wizard (continued) If you need to make any changes, click Back to modify your camera settings. Otherwise, click Restart to save and apply your settings. Click Restart Your setup is now complete! Click Link to launch your web browser and view your images.
  • Page 7 • The Xplug Control is included with the DCS-900 and should be installed on your computer if you want to use Active X to view your video images instead of Java. The Xplug Control must be installed on your computer if you are using the remote monitoring software.
  • Page 8: Technical Support

    Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.