Sd Recording - D-Link DCS-936L User Manual

Section 3 - Configuration
This option allows you to configure and set a schedule for the recording to an inserted microSD card.

SD Recording:

Check this box to enable the recording feature.
Trigger by: Select whether the event is activated by Motion, Schedule, or if the video
is Always recording.
• Motion: Enables recording when motion is detected. You can limit
motion-triggered recording to a specific schedule by selection Only
during and entering the times you want motion-triggered recording
to be enabled.
• Schedule: Enables recording according to a schedule. Enter the times
you want the camera to record. If you are recording snapshots, a
snapshot will be taken every second during these times.
• Always: This will enable continuous recording. If you are recording
snapshots, a snapshot will be taken every second.
• Sound: Enables recording when sound is detected. You can limit
sound-triggered recording to a specific schedule by selection Only
during and entering the times you want sound-triggered recording
to be enabled.
Recording
You can choose to record snapshots or video. Snapshots will use Video
Type: Profile 2. For video recordings, you may choose Video Profile 1 or 3 and
select the file format and recording length. For more on video profile
options, refer to Audio and Video on page 32.
Pre-event If Trigger By is set to Motion or Sound, this will set how many seconds
Recording:
to record before the event occurs. If you are recording snapshots, one
snapshot will be taken each second.
Post-event If Trigger By is set to Motion or Sound, this will set how many seconds
Recording:
to record after the event occurs. If you are recording snapshots, one
snapshot will be taken each second.
D-Link DCS-936L User Manual
SD Recording
39