Internet Connection Setup Wizard - D-Link dcs-5000l User Manual

Section 3 - Configuration
This wizard will guide you through a step-by-step process to configure your
new D-Link Camera and connect the camera to the Internet.
Click Next to continue.
Select what kind of Internet connection your camera should use:
• DHCP Connection (Default): If you are connected to a
router, or are not sure which connection to use, select DHCP
Connection.
• Static IP Address: This will allow you to manually enter
your network settings for the camera. Select this option if
your Internet Service Provider or network administrator has
provided you with a set of predefined IP addresses. If you
are not sure what settings to enter, check with your Internet
Service Provider or network administrator.
• PPPoE Connection: If your camera is directly connected
to a DSL modem, you may need to use PPPoE. Enter the
username and password provided to you by your Internet
Service Provider.
Click Next to continue.
D-Link DCS-5000L User Manual

Internet Connection Setup Wizard

30 30