Motion Detection Setup Wizard - D-Link DCS-936L User Manual

Section 3 - Configuration
This wizard will guide you through a step-by-step process to configure the motion detection
feature.
Click Next to continue.
Step 2
This step will allow you to enable or disable motion detection. You may draw areas for your
camera to monitor for motion.
1. Check the Enable Video Motion box.
2. Select Draw motion area and use your mouse to click and drag on the area that you
would like to monitor for motion.
3. Enter the sensitivity. Higher the number the more sensitive the detection of movement
will be.
4. You can select Erase motion area and erase areas if needed. Click Clear if you want to
erase the area.
5. Click Next to continue.
D-Link DCS-936L User Manual

Motion Detection Setup Wizard

23