System Requirements; Product Setup; Setup Wizard - D-Link DCS-2132L Quick Installation Manual

SySTEm rEQUIrEmENTS

• Computer with Microsoft Windows
• PC with 1.3GHz or above; at least 128MB RAM
• Internet Explorer 7 or above , Firefox 3.5 or above, Safari 4 and Chrome 8.0 or above
• Existing 10/100 Ethernet-based network or 802.11n wireless network

PrODUCT SETUP

setuP WiZarD

Step 1:
Connect the included Ethernet cable to the network cable connector located on the bottom panel of the
DCS-2132L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the bottom panel of the
DCS-2132L and connect it to your wall outlet or power strip. Power is confirmed when the green LED
Power Indicator located below the lens is lit.
Step 3:
Insert the DCS-2132L Driver CD in the CD-ROM drive. If the CD Autorun function does not
automatically start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where
D: represents the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears,
click Install and follow the on-screen instructions.
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to
finish setting up your camera.
DCs-2132l
® ®
7, Vista , or XP (for CD-ROM Setup Wizard), Mac OS or Linux
3