Internet Connection Setup Wizard - D-Link DCS-942L User Manual

Section 3 - Configuration
This wizard will guide you through a step-by-step process to configure your new D-Link
Camera and connect the camera to the Internet.
Click Next to continue.
Select how the camera will connect to the Internet. If you are unsure how your camera will
connect to the Internet, select Automatic IP. If your ISP has assigned you a static IP, select
Static IP Address and enter the following details:
IP Address:
Enter the IP address that the camera will use on your network. You may need to
get this information from your ISP or network administrator.
Subnet Mask: The default value is "255.255.255.0. " Used to determine if the destination is part
of the same network segment.
Default Gateway The gateway used to forward data to destinations in a different subnet. Invalid
(Router): gateway settings may cause the failure of transmissions to a different subnet.
Optional Primary
Primary domain name server that translates names to IP addresses.
DNS:
Optional
Secondary domain name server to backup the Primary DNS.
Secondary DNS:
Click Next to continue.
D-Link DCS-942L User Manual

Internet Connection Setup Wizard

25