Internet Connection Setup Wizard - D-Link SECURICAM DCS-910 User Manual

Section  - Configuration
This wizard will guide you through a step-by-step process to
configure your new D-Link Camera and connect the camera to the
Internet.
Click Next to proceed.
Click Next
You may configure your camera using
• DHCP Connection (by default), where your DHCP server will
automatically assign dynamic IP to your device.
• Static IP Address, or
• PPPoE connection, where your camera is directly connected
to the Internet through a DSL modem.
* Input the DNS information if you have chosen and assigned a
Static IP Address for your camera.
Click Next to proceed.
Click Next
D-Link DCS-910/90 User Manual

Internet Connection Setup Wizard