D-Link DCS-936L Technical Support Setup Procedure

Hide thumbs Also See for DCS-936L:

Technical Support Setup Procedure

How to Setup always record to SD Card DCS-936L?

Step 1: Connect the power of the camera and power on.

Step 2: Open Internet Explorer and enter

http://sg.mydlink.com

Step 3: Enter mydlink registered username and password. Click on Sign In.

Step 4: Select DCS-936L. Click on Settings

Step 5: Scroll your mouse down and click on Advanced Settings.

Step 6: Click on Open the Advanced Settings window.

Table of Contents

Do you have a question about the DCS-936L and is the answer not in the manual?

Page 1 Technical Support Setup Procedure How to Setup always record to SD Card DCS-936L? Step 1: Connect the power of the camera and power on. Step 2: Open Internet Explorer and enter http://sg.mydlink.com Step 3: Enter mydlink registered username and password. Click on Sign In.
Page 2 Technical Support Setup Procedure Step 7: Copy down the IP address of the DCS-936L show in the URL bar. Step 8: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar.