Configuration; Accessing The Web Configuration Utility - D-Link DCS-936L User Manual

Section 3 - Configuration

Configuration

Accessing the Web Configuration Utility

After completing setup through the mydlink Lite mobile app or Zero Configuration Setup, you
are ready to use your camera. The camera's built-in Web configuration utility is designed to allow
you to easily access and configure your DCS-936L.
To access your camera's configuration utility, use a web browser to log in to the mydlink.com
website, select your camera from your device list, then click on the Settings tab for your camera.
Use admin for the User name and the password you created during the setup process. If you did
not create a password, leave the password box blank. Click OK to continue.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a
closed network, the default IP is 192.168.0.20.
After logging in to your camera, the Live Video page will open.
D-Link DCS-936L User Manual 16