Avaya 4550T-PWR+ Fundamentals page 50

User interface fundamentals
7. To change the configuration of the selected ports, in the Multiple Port Configuration
8. In the Make Selection pane, click Apply Selection.
9. On the AutoLearn tab toolbar, click Apply to apply the changes to the
Job aid, buttons and dialogs on the Multiple Port Configuration pane
Button or dialog
name
Switch/Stack/Ports:
Port Editor
Apply Selection
Clear Selection
Undo Apply
Hide Non-Editable
50 Fundamentals
pane, double-click the cell beneath the column heading that represents the
parameter you want to change and do one of the following:
• Select a value from a drop-down list.
• Type a value in the cell.
The changes appear in the table.
configuration.
Button or dialog
Comments? infodev@avaya.com
Description
Opens the Port Editor
dialog.
Provides a list of all ports on
the switch or stack.
• Click OK to accept port
selections and return to
the Multiple Port
Configuration pane.
• Click Cancel to return to
the Multiple Port
Configuration pane.
• Click All to select all ports
and return to the Multiple
Port Configuration pane.
Applies port selections and
parameter changes to the
Multiple Port Configuration
pane and the port data table
for review.
Clears Multiple Port
Configuration selections.
Deletes port changes
applied in the Multiple Port
Configuration pane.
Displays only those
parameters that are
editable in the Multiple Port
Configuration pane for the
selected ports.
December 2011