User interface fundamentals
• Use a terminal or PC, with a terminal emulator, as the ACLI command station.
• If you use a console cable and console port, ensure that the terminal emulation program
conforms to settings listed in the following table.
Baud Rate
Data Bits
Stop Bits
Parity
Flow Control
Terminal Protocol
Opening an ACLI session
Procedure
1. Connect to the switch.
2. Enter the password, if applicable.
3. At the ACLI Banner Screen, enter CTRL+Y.
4. To access ACLI, from the main menu, press c or scroll to Command Line
5. Press Enter.
ACLI help
This section describes help available in ACLI.
ACLI help is available at all levels.
Command list
To obtain a list of all commands available from a prompt, enter a question mark (?).
Command options
To obtain a list of all options for a command, at the prompt enter a portion of a command
followed by a space and a question mark (?).
22
Fundamentals
Property
Interface.
Comments? infodev@avaya.com
Value
9600 bps
8
1
None
None
VT100 and VT100/ANSI
December 2011