Konftel 300IP Manual
  1. Manuals
  2. Brands
  3. Konftel Manuals
  4. Conference Phone
  5. Konftel 300IP
  6. Manual

Konftel 300IP Manual

Detailed end point ivt test plan and report
Hide thumbs Also See for 300IP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual
Detailed End Point IVT Test Plan and Report for Cisco
Communications Manager and Konftel 300IP
Test Date/ Result
(Completed by Cisco or Authorized Test House)
Partner Product Name
Partner Product Type
Partner Product Version #
Cisco Product Name
Cisco Product Version
API/Protocol(s) Used
Date Testing Completed
IVT Contact Email
© YEAR Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
MM/DD/YY - PASS/FAIL
Konftel 300IP
Konftel 300IP
2.4.4
Cisco Unified Communication Manager
10.5
SIP
2015-10-18
daniel.anens@konftel.com
Test Report
Page 1 of 64

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 300IP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Konftel 300IP

Summary of Contents for Konftel 300IP

  • Page 1 Test Report Detailed End Point IVT Test Plan and Report for Cisco Communications Manager and Konftel 300IP Test Date/ Result MM/DD/YY - PASS/FAIL (Completed by Cisco or Authorized Test House) Partner Product Name Konftel 300IP Partner Product Type Konftel 300IP Partner Product Version # 2.4.4...

  • Page 2: Table Of Contents

    Pre-Testing Information ......................3 Contents IVT Pre-requisites ........................3 Submission Instructions ......................3 1 Interoperability Verification Testing (IVT) Overview ............4 1.1 Interoperability Verification Testing Requirement ............4 1.2 IVT Objectives ........................ 4 1.3 IVT Focus ........................4 2 Instructions..........................5 3 Product and Testing Information ...................

  • Page 3: Ivt Pre-Requisites

    Pre-Testing Information The purpose of this section is to gather information about the 3 party Solution Partner Program (SPP) product being submitted for Interoperability Verification Testing (IVT) in support of receiving a Cisco Compatibility logo. The information collected in this section will be used to complete customization of test plan for the product integration with Cisco product(s). This section must be completed thoroughly to ensure that products features and requirements are properly understood and reflected appropriately in the test plan.

  • Page 4: Interoperability Verification Testing (Ivt) Overview

    1 Interoperability Verification Testing (IVT) Overview Interoperability Verification Testing Requirement Successful completion of Endpoint / USB Accessory IVT is required for Partner Products to be designated as “Cisco Compatible” and for Partner Products to be listed in the Cisco Solution Marketplace. IVT Objectives The IVT program’s objective is to provide verification that 3rd party Partner product(s) meet the following criteria: ●...

  • Page 5: Instructions

    2 Instructions Provide the requested information on the following pages for the product being submitted for Interoperability Verification Testing (IVT). 1) Complete Current Test Request Information, Product Category, and Product Description for all product pairings (Cisco Product + Program Partner Product) being submitted. Only requests with all required sections completed will be accepted.

  • Page 6: Product And Testing Information

    3 Product and Testing Information IVT Request info here © 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 6 of 64...

  • Page 7: Test Set Up And Tools

    Product Description The Konftel 300IP is a flexible SIP-based conference phone, perfect for companies that use IP voice services. It's clear, natural sound comes from OmniSound HD, Konftel's patented wideband audio technology. The stylishly designed Konftel 300IP is packed with intelligent features for more efficient conference calls. Record and store meetings on a SD memory card.

  • Page 8: Product Integration Diagram

    Product Integration Diagram Product Integrated Use Cases Konftel 300IP is an excellent SIP conference phone with support for local 5-way calls. It can be used in small and large meeting rooms (with expansion microphones as accessory). 6 Test Plan Introduction This document is the detailed Interoperability Verification Test Plan and Report for Cisco Unified Communications Manager and Endpoint/USB Accessory partner product.
  • Page 9 If a severity 1 or 2 failure occurs, irrespective of whom is responsible for the problem (Cisco or the 3rd party product), the testing is considered unsuccessful. Table 1. Defect Severity Level Severity Description Catastrophic Common circumstance causes the entire system or a major subsystem to stop working affects other areas/devices no workaround Severe Important functions are unusable does not affect other areas/devices no workaround...

  • Page 10: Executive Summary

    Test Cases that were Not Executed: 2 ● Observations: Konftel 300IP does not support the most Cisco specific features. No softkeys on Konftel 300IP. © 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 10 of 64...

  • Page 11: Testing Details

    8 Testing Details Items Tested Features that are specific in this section are the high level categories the testing will focus on. ● Party installation, configuration and validation ● Security Requirements ● Functional testing of the various features interfacing through the 3 party product to the Cisco product ●...

  • Page 12: Equipment Requirements

    IP Phones 6941,79XX, 8851, 8861, 8945, 8961,9951,9971,DX650 Phoneview Remote Phone Control Server (RPC) DUT(s) 3 or more Konftel 300IP Lab Network Topology © 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 12 of 64...

  • Page 13: Test Case Result Reporting

    Test Case Result Reporting Table 4. Test Results Legend Result Description Pass (P) The test case passed with no exceptions Fail (F) The test case failed – details of the failure are noted in the Comments column The test case is not applicable to the product under test. Provide justification in the “Comments” column. Not supported.

  • Page 14: Installation Tests

    Run “Step 1_Endpoint_Registration” command to register endpoints. Run “Step 2_Record_Connectivity_Validation” command after verifying the endpoints are registered with the correct network and load information. Integration Test Test is focused on ensuring that the 3 party product (DUT) is registered with Call Manager successfully EP-1 Test Case # Category...

  • Page 15: Entrance Tests

    Tests in this section requires RPC tool to remotely control Cisco IP Phones for manual calls. Follow instructions highlighted in green in each test case before execution. It is important to restore endpoints to it’s original state in some test cases before proceeding to next test case. Run “Step 3: Record_Functional_Test_Execution”...
  • Page 16 Features and Services EP-3 Test Case # Category RFC_Standard Functional Test: Inter-Cluster Call Objective Verify inter-cluster calls between DUT(s), SCCP and SIP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; • Remote CUCM DUT:8000; SCCP:5200; SIP:6200; • RPC is used to remotely control IP Phones: 5200, 6200; Test Procedure Expected Results •...
  • Page 17 EP-5 Test Case # Category RFC_Standard Functional Test: SIP URI Objective Verify intra-cluster SIP URI calls between DUT and SIP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 (URI:dutuser01@abc.inc ); 7101 (URI:dutuser02@abc.inc ); SIP:2000 (URI:cuser20@abc.inc • Configure Speed Dial on button 3 for 7100, 7101, 2000: ...
  • Page 18 EP-7 Test Case # Category Functional Test: CFA RFC_Standard Objective Verify “CFA” calls between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCMDUT:8000; SCCP:5200; SIP:6200; • PSTN: 210-222-5400 • Enable CFA for DN(s): ...
  • Page 19 EP-8 Test Case # Category Functional Test: CFNA RFC_Standard Objective Verify “CFNA” calls between DUT(s), SCCP and SIP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCMDUT:8000; SCCP:5200 SIP:6200; • Voicemail and Call Waiting disabled for all DN(s) DevicePhoneDNLineVoicemailNoVoiceMail Call WaitingMax.

  • Page 20: Features And Services

    EP-9 Test Case # Category Functional Test: CFB RFC_Standard Objective Verify “CFB” calls between DUT(s), SCCP and SIP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SCCP:5200; SIP:6200; • Voicemail and Call Waiting disabled for all DNs •...

  • Page 21: Manual Functional Tests

    EP-10 Test Case # Category Functional Test: Hold & Resume RFC_Standard Objective Verify “Hold & Resume” calls between DUT(s), SIP, SCCP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SCCP:5200; • PSTN:210-222-5400; •...
  • Page 22 EP-11 Test Case # Category Functional Test: Call Waiting RFC_Standard Objective Verify Call Waiting calls between DUT(s), SIP and SCCP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SCCP:5200; SIP:6200; • Call Waiting enabled for all DN(s): DevicePhoneDNLineCall WaitingMax. Calls4; Busy Trigger2; •...
  • Page 23 EP-12 Test Case # Category Functional Test: Blind Transfer RFC_Standard Objective Verify “Blind Transfer” calls between DUT(s), SIP and SCCP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN DN: 210-222-5400 • Invalid DN:7777; •...
  • Page 24 EP-13 Test Case # Category Functional Test: Consult Transfer RFC_Standard Objective Verify “Consult Transfer” calls between DUT(s), SIP, SCCP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN DN: 210-222-5400 • RPC is used to remotely control IP Phones: 1000, 2000, 2102225400;...
  • Page 25 EP-14 Test Case # Category Functional Test: Conference Call RFC_Standard Objective Verify Conference call between DUT(s), SIP, SCCP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN DN: 210-222-5400; • Service parameter: Drop Ad Hoc Conference  Never (Default) •...
  • Page 26 EP-15 Test Case # Category Functional Test: Call Park RFC_Standard Objective Verify “Call Park” call for a DUT(s), SIP, SCCP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN DN: 210-222-5400; •...
  • Page 27 EP-16 Test Case # Category Functional Test: Call Park Reversion RFC_Standard Objective Verify “Call Park Reversion” call for DUT(s), SIP and SCCP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • Call Park Code: RoutingCall Park3001 •...
  • Page 28 EP-17 Test Case # Category Functional Test: Directed Call Park RFC_Standard Objective Verify “Assisted Directed Call Park” call between DUT(s) and SIP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SIP:2000-2003; SCCP:1000; • Remote CUCM DUT:8000; • Enterprise Parameter: BLF For Call Lists Enable •...
  • Page 29 EP-18 Test Case # Category Functional Test: Direct Transfer RFC_Standard Objective Verify “Direct Transfer” call from a shared line between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 210-222-5400;...
  • Page 30 EP-19 Test Case # Category Functional Test: Automated CDR Creation RFC_Standard Objective Verify joining two “Ad-Hoc Conference” using DUT(s), SIP, SCCP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SCCP:5200; SIP:6200; • PSTN: 210-222-5400;...
  • Page 31 EP-21 Test Case # Category Functional Test: Callback RFC_Standard Objective Verify “Callback” calls between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN DN: 210-222-5400 • VM and CW disabled for all phones ; •...
  • Page 32 EP-22 Test Case # Category Functional Test: Barge RFC_Standard Objective Verify “Barge” call using DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN:210-222-5400 • Cluster-wide Service Parameters: Built In Bridge EnableOn Party Entrance ToneTrue •...
  • Page 33 EP-23 Test Case # Category Functional Test: cBarge RFC_Standard Objective Verify “cBarge” call using DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN DN: 210-222-5400; • Enable Barge feature by setting Cluster-wide Service Parameters: ...
  • Page 34 EP-24 Test Case # Category Functional Test: Shared Line – Hold/Resume RFC_Standard Objective Verify “ Hold/Resume” call on a shared line using DUT(s), SCCP and SIP endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; •...
  • Page 35 EP-25 Test Case # Category Functional Test: Jabber for Windows RFC_Standard Objective Verify Jabber calls originating & terminating to DUT(s) endpoints (Jabber for Windows) Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • Jabber for Windows (DevicePhoneAdd NewCSFUSER1:DN:1922; End User:juser01/123456) •...
  • Page 36 EP-27 Test Case # Category Functional Test: Video Endpoints RFC_Standard Objective Verify video calls originating & terminating to DUT(s) endpoints Pre-Test Conditions • Local CUCMDUT(s): 7100 & 7101; • Remote CUCMDUT DN:8000; • Video capable phone DN: 2003 Test Procedure Expected Results •...
  • Page 37 Extension Mobility service not supported on DUT EP-29 Test Case # Category Functional Test: Hunt Group RFC_Standard Objective Verify “Hunt Group” calls using DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SCCP DN:5200; SIP DN:6200; •...
  • Page 38 EP-30 Test Case # Category Functional Test: Hunt Group RFC_Standard Objective Verify “Hunt Group” calls on DUT(s) when no members are available Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SCCP DN:5200; SIP DN:6200; • PSTN: 210-222-5400;...
  • Page 39 EP-31 Test Case # Category Functional Test: Hunt Group RFC_Standard Objective Verify “Hunt Group” calls on DUT(s) when maximum queue length exceeded Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SCCP DN:5200; SIP DN:6200; • PSTN: 210-222-5400;...
  • Page 40 EP-32 Test Case # Category Functional Test: Secure Endpoint RFC_Standard Objective Verify “Authenticated” call between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101 (Authenticated); SCCP:1000; SIP:2000 (Non-Secure); SCCP:1001; SIP:2001 ( Authenticated); • Remote CUCM DUT:8000 (Non-Secure); •...
  • Page 41 EP-33 Test Case # Category Functional Test: Join Across Line RFC_Standard Objective Verify “Join Across Lines” calls between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400; •...
  • Page 42 EP-34 Test Case # Category Functional Test: Hotline RFC_Standard Objective Verify “Hotline” calls between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400; • Hotline Configuration to dial out 234-8000: ...
  • Page 43 EP-35 Test Case # Category Functional Test: Group Pickup RFC_Standard Objective Verify “Group Pickup” calls between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400; • Group Pickup configured on all phones; Group: Sales (DN: 7100 & 1000); Group: TAC (DN: 7101 & 2000); ...
  • Page 44 EP-36 Test Case # Category Functional Test: Do Not Disturb (DND) RFC_Standard Objective Verify “Do Not Disturb Ringer Off “ feature is supported for DUT(s) endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400;...
  • Page 45 EP-37 Test Case # Category Functional Test: Do Not Disturb (DND) RFC_Standard Objective Verify “Do Not Disturb Call Reject “ feature is supported on DUT(s) endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400;...
  • Page 46 EP-38 Test Case # Category RFC_Standard Functional Test: iDivert Objective Verify “IDivert “ call between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400; • VM enabled on all phones; VM Pilot # 7000; DevicePhoneDNLineVoicemailDefault •...
  • Page 47 EP-39 Test Case # Category RFC_Standard Functional Test: CFA & iDivert Objective Verify “CFA” & “iDivert “ call between DUT(s), SCCP, SIP and PSTN endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400; ...
  • Page 48 EP-40 Test Case # Category RFC_Standard Functional Test: Malicious Call Objective Verify DUT(s) is able to mark a call malicious Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400; • Update softkey template on deviceSIP_EP_User (Includes MCID softkey) •...
  • Page 49 EP-41 Test Case # Category RFC_Standard Functional Test: Mobile Connect Objective Verify DUT(s) supports Mobile Connect call to a remote DUT endpoint Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225400; • Configure CUCM Service Parameter: Device Mobility ModeOn •...
  • Page 50 EP-42 Test Case # Category RFC_Standard Functional Test: Mobile Connect Objective Verify DUT(s) supports Mobile Connect call to a remote PSTN endpoint Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • PSTN: 2102225401; • Configure CUCM Service Parameter: Device Mobility ModeOn •...
  • Page 51 EP-43 Test Case # Category RFC_Standard Functional Test: Mobile Connect Objective Verify DUT(s) supports Mobile Connect call to a remote SIP endpoint Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; SIP:6201; • Configure CUCM Service Parameter: Device Mobility ModeOn •...
  • Page 52 EP-44 Test Case # Category RFC_Standard Functional Test: Mobile Voice Access (MVA) Objective Verify Inbound Mobile Voice Access (MVA) calls from DUT(s) endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • CUCM Service Parameter: Enable Enterprise Feature AccessTrue Enable Mobile Voice AccessTrue Mobile Voice Access Number8005555...
  • Page 53 EP-45 Test Case # Category RFC_Standard Functional Test: Enterprise Feature Access (EFA) Objective Verify Inbound Enterprise Feature Access (EFA) - Hold/Resume call from a DUT endpoint Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • Service Parameter: Enable Enterprise Feature AccessTrue Enable Mobile Voice AccessTrue...

  • Page 54: Manual Negative Tests

    Tests in this section require manual calls. Run Step_4_“Record_Negative_Test_Execution”command after executing all tests. Retrieve CDR(s) from CUCM to validate calls. Negative Tests EP-46 Test Case # Category Negative Test: PUB Failure RFC_Standard Objective Verify a PUB failure should not affect stable or transient calls on DUT(s) Pre-Test Conditions •...
  • Page 55 EP-47 Test Case # Category RFC_Standard Negative Test: SUB Failure Objective Verify a SUB failure should not affect stable calls on DUT(s) Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101;SCCP:1000; SIP:2000; • Remote CUCMDUT:8000; • RPC is used to remotely control IP Phones with DN: 1000,2000; Test Procedure Expected Results •...
  • Page 56 7101 did not go on-hook when 7100 was disconnected. No SIP message to that extension. DUTs on PoE EP-49 Test Case # Category RFC_Standard Negative Test: Phone Power Failure Objective Verify DUT(s) recovers from a power failure Pre-Test Conditions • Local CUCMDUT(s):7100 &...

  • Page 57: Miscellaneous Tests

    Test Results: Comments Never get ringback timeout on step 4 (No SIP messages received) Tests in this section require manual calls. Run “Step 5_Record_Miscellaneous_Test_Execution”command after executing all tests in this section. Retrieve CDR(s) from CUCM to validate calls. Miscellaneous Tests These tests are executed to verify specific information about the third-party products provided by partners EP-51 Test Case #...
  • Page 58 EP-52 Test Case # Category Miscellaneous Test: DUT display features RFC_Standard Objective Verify different packetization period support on DUT(s) endpoints Pre-Test Conditions • Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; • Remote CUCM DUT:8000; • Configure Service Parameter: Preferred G.711 Millisecond Packet Size :10 •...
  • Page 59 − Information on DUT is saved locally. Like missed/placed/received − calls, Date & Time is set locally or to a NTP server. No softkeys. Two accounts/lines can be used on one DUT EP-54 Test Case # Category Miscellaneous Test: Long Duration Calls RFC_Standard Objective Verify long duration calls between DUT(s), SCCP, SIP and PSTN endpoints...
  • Page 60 Test Procedure Expected Results • 1. 7100 dials 1100 1100 answers7100 on-hook after 120s Intra-cluster calls establish between DUT & Cisco IP Phone • 2. 1100 dials 71007100 answers1100 on-hook after 120s Inter-cluster calls establish between DUT & Cisco IP Phone 3.

  • Page 61: Appendix A: Test Result Matrix

    Run “Step 6_Complete_Submit”command after executing all tests in this Test Plan. Complete the Test Result Matrix in Appendix A. Provide exceptions, notes or issues in the comments section. Submit this completed Test Report to sb-ivt-submit@cisco.com APPENDIX A: TEST RESULT MATRIX Test Case # Comments EP-1...
  • Page 62 Test Case # Comments EP-31 EP-32 EP-33 Feature not supported on DUT EP-34 Feature not supported on DUT EP-35 No Group Pickup softkey on DUT EP-36 Feature DND not supported on DUT EP-37 Feature DND not supported on DUT EP-38 No iDivert softkey on DUT EP-39 No iDivert softkey on DUT...
  • Page 63 ===============END OF DOCUMENT=========== © 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 63 of 64...
  • Page 64 Printed in USA CXX-XXXXXX-XX 10/11 © 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 64 of 64...

Table of Contents