Instructions - Konftel 300IP Manual

2 Instructions

Provide the requested information on the following pages for the product being submitted for Interoperability Verification
Testing (IVT).
1) Complete Current Test Request Information, Product Category, and Product Description for all product pairings
(Cisco Product + Program Partner Product) being submitted. Only requests with all required sections completed will
be accepted. Failure to provide this information will result in the request being denied.
2) Submission:
a)
"Add New IVT Request" next to the product to be submitted for IVT
b)
incomplete request
c)
Filename: CiscoSystems_FASTAPP_V1_1+CIscoProduct_1_0.doc
Click on link below for detailed instructions:
http://solutionpartner.cisco.com/documents/8974369/0/DeveloperPartnerGuide.pdf
Help or questions related to SPP Portal, listings or application
General Questions: Contact your Cisco representative or send email to
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Access your Developer Dashboard, go to the Registered Products Tab and select "Actions" and
Upload this document to the IVT Request, failure to upload this document will result in an
Save using filename: <COMPANY_PRODUCT_VX_X+CISCO_PRODUCT_VX_X>.doc Example
status::solutionpartnerprogram-support@cisco.com
ivt_questions@cisco.com
Page 5 of 64