Ivt Pre-Requisites; Submission Instructions - Konftel 300IP Manual

Pre-Testing Information
The purpose of this section is to gather information about the 3
submitted for Interoperability Verification Testing (IVT) in support of receiving a Cisco Compatibility logo. The information
collected in this section will be used to complete customization of test plan for the product integration with Cisco product(s).
This section must be completed thoroughly to ensure that products features and requirements are properly understood and
reflected appropriately in the test plan. The limits stated in this questionnaire will be tested. Anything (limits,
functionality, interfaces) not reported in this document will not be supported.
Complete all sections with
This document will be reviewed for content, completeness and appropriate integration methods by Cisco and will not be
submitted for test plan generation or test scheduling until approval. This process generally takes about 10 business days,
though can be more or less dependent on complexity and current demand.

IVT Pre-requisites

The following prerequisites must be complete prior to submitting a request for testing:
1) Approved application in SPP for the product pairing being submitted for test.
a) Product Pairing = Cisco Product Major Version + Partner Product Major Version
b) Cisco Product Major Version must be generally available
c) Partner Product Major Version must be generally available
2) Any use of Cisco Intellectual Property (proprietary protocols or interface methods) must have been approved by Cisco
and have appropriate agreements in place. This is not appliEPle to standard published integration methods. Questions
regarding interface methods should be directed to Developer Services or your Cisco Partner Manager.

Submission Instructions

Provide the requested information on the following pages for the product being submitted for Interoperability Verification
Testing (IVT).
Complete Current Test Request Information, Product Category, and Product Description for all product pairings (Cisco Product
+ Program Member Product) being submitted.
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
<PARTNER COMPLETED>
Only requests with all required sections completed
rd
party Solution Partner Program (SPP) product being
Page 3 of 64