Table of Contents
Advertisement
Using Your Hob
To switch the hob on
•
To switch the power on, touch and hold the "On/off sensor" (1)
approximately two seconds. The hob will beep and all five cooking
zone indicators will show "0".
Please note: If a power level is not set within ten seconds, the hob
will switch off automatically.
To set the power level
•
Simply select the desired heat setting using the "+" or "-" selectors.
The power level ranges from 1 (minimum) to 9 (maximum). The hob
will then begin heating providing that the correct cookware is being
used.
Please note: If the "+" selector is used first to adjust the heat setting
then the heat setting will default to 4. If the "-" is used first then the
heat setting will default to 9. The heat settings can be adjusted
normally using the "+" and "-" selectors.
To turn the power off to a zone
•
To switch off a zone you can use the "-" selector to return the
heat setting to 0 or alternatively you can press both the "+" and "-"
selectors simultaneously for that zone. The cooking zone indicator
will display a "0" to confirm that the zone is now inactive.
•
If switching off multiple zones, the above steps need to be taken
for each zone. When all the zones are at "0", the hob will switch off
automatically after approximately ten seconds.
•
Alternatively, to switch off the hob immediately, touch and hold the
8
for
Advertisement
Table of Contents
