Adjustments - Royal Sovereign RSC-5500H Service Manual

4.1 Adjusting Release liner Shaft Speed
CAUSES:
1.Main rollers and Release liner shaft speed is not synchronized.
MEASURES:
Adjust Release liner shaft speed by loosenning or tightenning the Handle-Tension
Tighten–Rotate the plate-pressure accroding to yellow arrow shows in below picture.
Lossen–Rotate the plate-pressure accroding to red arrow shows in below picture.
4.2 Adjusting rollers
Pressure
• Use Wrench
to adjust the roller pressure:
C.W – Increase pressure.
C.C.W – Decrease pressure.
1.Using Push-Pull Scale , measure
5 spots as shown on Figure A:
The pressure should be 5~6 kgf
2.Checking for over all tension –
when the machine is running, check that
the top and the bottom films are fed in
without any wrinkles.

4. Adjustments

Handle-Tension
21
Wrench
Pressure-Nut
Figure A