1) Rubber Strip - Royal Sovereign RSC-5500H Service Manual

3.5 Replacing the Rubber Strip and The friction plate
3.5.1 Replacing the Rubber Strip .
a. Remove the Shaft film
b. Take out the holder-rubber strip by gently tapping a appropriate tool putting
into the hole and replace rubber strip with a new one.
3.5.2 Replacing the The friction plate .
a. Remove the Friction adjust system.
Situation 1:
1. Unfasten 2 screws assembled in the Part-A with Hexa wrech. (Figure 1-1) & (Figure 1-2)
Situation 2:
1.Remove the sprocket after unfasten screw assembled in the Sprocket with Hexa wrech .
2.Disassemble C-ring showing in Figure 2 with circlip pliers.
Situation 3:
Holder-rubber strip
Rubber Strip
Part A
Figure 1-1
15
Figure 1-2