Wds Settings - LevelOne AIP-W512 User Manual

4.6.5 WDS Settings

Choose menu "Wireless → WDS Settings", you can configure the advanced settings of your
wireless network.
To add wireless AP by MAC Address, click Enable WDS.

MAC Address - The wireless station's MAC address that you want to add.

Data Rate - Select transmission data rate from the drop down menu. Data rate can be
auto-selected, 1Mbps to 54Mbps or MCS.

Set Security - There are two wireless security modes supported by the WDS: WEP (Wired
Equivalent Privacy), and WPA2 (Wi-Fi Protected Access 2).
 Encryption – Use drop down menu to configure WDS security, you can select it from
None, WEP 64-bits, WEP 128-bits, or WPA2 (AES).
WEP Key Format – Hexadecimal and ASCII formats are provided here

format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length. 64-bit - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not promoted) or 5 ASCII characters. 128-bit - You can enter 26 hexadecimal
digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 13 ASCII
characters.
Figure 4-24 Wireless Advanced
- 37 -
AIP-W512
.
Hexadecimal