Advanced Settings - LevelOne AIP-W512 User Manual

 Associate Clients
that shows the MAC address, transmit-packet, receive-packet and transmission-rate for
each associated wireless client.
Enable Mac Clone (Single Ethernet Client) – Copy your system's NIC MAC address as

wireless client's MAC address, this function only works if Client mode is selected.
Enable Universal Repeater Mode

acts as AP and client simultaneously in this mode).
SSID for Extended Interface – Assign a SSID when Universal Repeater Mode is enabled.


4.6.2 Advanced Settings

Choose menu "Wireless → Security", you can configure the security settings of your wireless
network.

Fragmentation Threshold - This value is the maximum size determining whether packets
will be fragmented. Setting the Fragmentation Threshold too low may result in poor network
performance due to excessive packets, 2346 is the recommended default setting.
RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is

larger than the specified RTS Threshold size, the router will send RTS frames to a particular
receiving station and negotiate the sending of a data frame. The default value is 2346.
Beacon Interval - Enter a value between 20-1000 milliseconds for the Beacon Interval. The

beacons are the packets sent by the router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
–
Click Show Active Clients button to open Active Wireless Client Table
–
Check to enable Universal Repeater Mode where router
- 31 -
AIP-W512