server will change accordingly at the same time,while the Virtual Server and DMZ Host will
not take effect until they have been re-configured.
Default Gateway - Enter the gateway IP address in dotted-decimal notation provided by your
system administrator.
DHCP – Select Disabled, Client or Server in different operation mode for AIP-W512
DHCP Client Range - Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP address automatically.
Show Client – Press open to active the DHCP Client Table window that shows the active
clients with their assigned IP address, MAC address and time expired information. [Server
mode only]
DHCP Lease Time – Amount of time the IP address is leased for.
Set Static DHCP - Manual setup Static DHCP IP address for specific MAC address. [Server
mode only]
Domain Name - Assign Domain Name and dispatch to DHCP clients [optional]
802.1d Spanning Tree - Enable or disable the IEEE 802.1d Spanning Tree function from
pull-down menu.
Clone MAC Address - Fill in the MAC address for the MAC address to be cloned.
- 20 -
AIP-W512