LevelOne AIP-W512 User Manual page 19

 IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
 Subnet Mask - The Subnet Mask is used for the WAN IP address, usually
255.255.255.0.
Default Gateway - Enter the gateway IP address into the box if required.

Primary DNS - Enter the DNS Server IP address into the box if required.

7. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11.

Band: Keep the default setting: 2.4GHz (B+G+N). If you just want to use a specific
protocol, please use the drop down menu to select it.

Mode: This field determines the wireless mode which the AIP-W512 works on.

Network Type: Keep the default setting: Infrastructure. If you just want to use another
operation mode, please use the drop down menu to select it.

SSID: Create a unique and easy way to remember the name of your wireless network.
You can also keep default settings without the device being affected.
Channel Width - Select any channel width from the pull-down list. The default setting is

automatic therefore it can adjust the channel width for your clients automatically.
Figure 3-11 Wireless
- 14 -
AIP-W512