Advanced Settings - LevelOne WBR-6805 User Manual

3.4.2 Advanced Settings

You can set advanced wireless LAN parameters for this router. We recommend not changing
these parameters unless you know what changes will be on this router.
Items
Fragment
Threshold
RTS Threshold
Beacon Interval
Preamble Type
RF Output
Power
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
Information
This value should remain at its default setting of 2346. If you experience a
high packet error rate, you may slightly increase your fragmentation
threshold within the value range of 256 to 2346. Setting the fragmentation
threshold too low may result in poor performance.
Request To Send threshold. This value should remain at its default
setting of 2347. If you encounter inconsistent data flow, only minor
modifications to the value range between 0 and 2347 are recommended.
Beacons are packets sent by an access point to synchronize a wireless
network. Specify a beacon interval value. Default (100ms) is
recommended.
The length of CRC blocks in the frames during the wireless
communication.
Select the signal strength for the wireless network.
23