Application and properties
1.12 Codes: Front LEDs
1.12
Codes: Front LEDs
Figure 1-4
Front with the LEDs
There are 5 LEDs on the front to indicate the following:
SF
LINK
40
Red, on continuously
Red, flashing
Green, on continuously
System fault:
Lit when a fault/error has occurred
System fault:
Flashes (at an interval of approximately
1 second) if the configuration is
incorrect or no BOOTP/DHCP server
could be found.
Connection via the RJ-45 interface:
Ethernet connection is established
Operating Instructions, 03/2012, C79000-G8976-C244-02
CP 243-1