Siemens CP 243-1 Operating Instructions Manual page 111

Error byte
hex dec
16#06 6
16#07 7
16#08 8
16#09 9
16#0A 10
16#0B 11
16#0C 12
16#0D 13
CP 243-1
Operating Instructions, 03/2012, C79000-G8976-C244-02
Description
The connection could not be
established or was aborted
or an attempt was made to
execute a request and the
parameter assignment of
the HTTP server was not
correct.
The response packet
contains logical errors
The read request failed
The write request failed
Channel not configured
The channel is configured
as SERVER but an attempt
was made to trigger a
read/write request
Previous read/write request
not yet completed.
Invalid request identifier
All data transfers are
aborted because a new
configuration was triggered
by the user program.
5.2 Error messages of the CP 243-1
Reaction/remedy
Check connection path
to the communications
partner
Check HTTP server
configuration for
completeness
A new read/write
request can be
triggered.
Check the
configuration.
A new read/write
request can be
triggered.
The parameters of the
read request should be
checked.
A new read/write
request can be
triggered.
The parameters of the
write request should be
checked.
A new read/write
request with other
parameters can be
triggered.
A new read/write
request with other
parameters can be
triggered.
A new read/write
request can be
triggered.
Evaluate "DONE"
return parameter of the
previous read/write
request
A new read/write
request can be
triggered
Restart of the system
Diagnostics
Transfer mechanism
Byte offset in the Return value
SM area
(ETHx_)
37
25 - 32 _XFR
34 _EMAIL
35 _FTPC
25 - 32 _XFR
25 - 32 _XFR
25 - 32 _XFR
34 _EMAIL
35 _FTPC
25 - 32 _XFR
25 - 32 _XFR
34 _EMAIL
35 _FTPC
25 - 32 _XFR
34 _EMAIL
35 _FTPC
25 - 32 _XFR
33 _CFG
34 _EMAIL
111