Installing Your Oven Accessories; Installing Your Cooktop Accessories - Westinghouse WFE914SB User Manual

INSTALLING YOUR OVEN
ACCESSORIES
Prior to installing accessories, remove all packaging and
remove plastic film from external panels.
Side racks
The side racks that come with your oven are fitted in the
following manner:
• Insert the 2 rear pegs into the holes provided.
• Locate the front peg into the front access hole and
push in firmly.
Shelves and trays
The shelves are designed so that they have maximum
travel but cannot be accidentally pulled right out. The trays
are designed in the same way and fit straight into the side
racks.
• Locate the rear edge of the shelf/tray in between 2
guide rails of the side rack – see diagram. Ensure the
same rail positions on both sides of the oven are
being engaged.
• With the front edge raised, begin to slide the shelf into
the oven.
10

INSTALLING YOUR OVEN ACCESSORIES

• Once the indents have passed the front edge of the
side rack, the shelf can be pushed completely in.
• When fully inserted the shelf/tray should not interfere
with the closed door.
Installing burners
• The burner crown must be fitted correctly into the
burner cup or damage will occur during operation.
• To do this, ensure that the 2 ribs on either side of the
spark plug hole are positioned into the 2 slots on the
burner cup.
• The burner cap and burner crown must be clean and
located correctly for the burner to light.
NOTE: When the burner is correctly fitted it will sit level
on the hob.
Burner cap
Burner crown
Flame safeguard
sensor
Burner cup
Ignition
spark plug
Injector