BEFORE OPERATING YOUR
APPLIANCE FOR THE FIRST TIME
Oven shelf location
Not a shelf
position
5
4
3
2
1
NOTE: The top ledge is not a shelf position. There are no
stops for shelf withdrawal.
Separate grill
•
To insert the grill tray in a separate grill underbench
product, open the grill door and fully extend the grill
drawer Position the grill tray so that the slots on the
outer edges fit over the tabs on the slides.
14
INSTALLING YOUR OVEN ACCESSORIES
5 shelf
positions
Rear slot
Slide tab
INSTALLING YOUR OVEN
ACCESSORIES
Burner crowns and caps
•
The burner crown must be fitted correctly into the
burner cup or damage will occur during operation.
•
To do this, ensure that the 2 ribs on either side of the
spark plug hole are positioned into the 2 slots on the
burner cup (see diagram).
•
Burner cap and burner crown must be clean and
located correctly for the burner to light.
NOTE: When the burner is correctly fitted it will sit level
on the hob.
burner crown
burner cup
Trivets
•
Take care when placing the trivets as dropping them
may damage the hob or trivet.
trivets
wok burner
burner cap
burner crown