Configure Fxo Port On Gxw410X When Peered With Ucm6100; Figure 4: Method 1 - Configure Inbound Rule On Ucm6100; Figure 5: Method 1 - Configure Fxo Port On Gxw410X: General Settings - Grandstream Networks UCM6100 User Manual

Configuring ucm6100 with gxw410x

Hide thumbs Also See for UCM6100:

Table of Contents

The default destination is configured to IVR. Ensure to select the proper extension for the IVR.

CONFIGURE FXO PORT ON GXW410X WHEN PEERED WITH UCM6100

1. Connect the PSTN line to the GXW410X FXO port.

2. On the GXW410X web GUI, go to the Accounts->Account X-> General Settings page and enter the

IP address of the UCM6100 that you are peering with.

3. Please make sure the SIP Registration option under Accounts-> Account X-> SIP Settings is set to

No. In the following example, UCM6100 has IP address 192.168.40.207.

CONFIGURING UCM6100 WITH GXW410X

Page 7 of 13

Table of Contents