Adjusting The Handle; Figure 1-2 Type Of Handle Position; Figure 1-3 Attaching And Detaching The Handle - Agilent Technologies U3401A User's And Service Manual

Adjusting the Handle

To adjust the handle, grasp the handle by the side and pull outward.
Then, rotate the handle to the desired position. Below are the possible
handle positions.

Figure 1-2 Type of handle position

To attach or detach the handle, rotate the handle upright and pull it out
from the sides of the instrument. See

Figure 1-3 Attaching and detaching the handle

U3401A User's and Service Guide
Benchtop
position
Getting Started
Carrying position
Handle removal position
Figure 1- 3
1
7