Procedure
1 Press
2 Use
3 Press
4 Press
5 Use
6 Press
7 Press
8 Press
Trigger Mode
This multimeter has two types of trigger mode.
• Internal — triggers measurements continuously.
• External — triggers a measurement only when a direction is given.
The external trigger is used with a delay settling that has been set by the
multimeter automatically. The amount of trigger delay varies depending on
different function. When external trigger is enabled, the multimeter
determines the range for the primary display based on the input at that
time.
U3401A User's and Service Guide
to enter the upper limit setup mode. The upper limit
is shown on primary display while the HI annunciator is shown on
secondary display.
,
,
to store the specified HI limit value.
to enter the lower limit setup mode.
The lower limit is shown on primary display while the LO annunciator
is shown on secondary display.
,
,
to store the specified LO limit value.
to enable percentage operation.
to disable percentage operation.
, and
to modify the upper limit.
, and
to modify the lower limit.
Operations and Features
2
47