5 Press
6 Press
7 When the refresh hold is not in use, repeat step 1 to step 4 to turn off
Figure 2-16 Typical refresh hold operation display
• For voltage and current measurements, the held value will not be updated when the reading below
N O TE
• For resistance and diode measurements, the held value will not be updated of the reading at OL or
U3401A User's and Service Guide
twice quit the Setup menu.
to select refresh hold mode. The present value will be held
and the HOLD will be lit. The multimeter is now ready to hold a new
measurement value once the variation of measuring value exceeds the
setting of the variation count. The HOLD annunciator will be blinking
continuously.
the refresh hold's state.
500 counts.
open state.
Operations and Features
2
45