For Macintosh Computers; Setting Up Your Stylus Scan 2000 - Epson Stylus Scan 2000 Manual

Your computer should also meet the following system requirements.
Minimum System Requirements
i486/25 MHz for Windows 95
i486/66 MHz for Windows 98
32 MB RAM
50 MB hard disk space for Windows 95,
and 98
VGA size, 16 bit color
Your computer dealer can help you update your system if it does not meet these
requirements.

For Macintosh computers

You can use this printer with the following Apple
need a shielded USB cable.
Applicable computer models:
iMac Series (for USB)
Power Macintosh G3 (for USB)
Your Macintosh must also meet the following system requirements.
Note:
Macintosh can be connected to the Stylus Scan by using a USB cable only.
Minimum System Requirements
System 8.1 + iMac update
7 MB of available memory
12 MB of available memory when
background printing is turned on.
Note:
The amount of available memory varies according to the number and kind of
applications that are open. To see how much memory is available, choose
This Computer
in kilobytes) under
The memory requirements above are for printing on Letter size paper. These
requirements may vary depending on the size of the paper, the type of applica-
tion you are using, and the complexity of the document you want to print.
In addition to these system and memory requirements, you also need 10 MB of free
hard disk space to install your printer software. To print, you need extra hard disk space
amounting to about double the size of the file you want to print.
System Requirements
from the Apple menu and refer to the memory size (listed
Largest Unused Block
Recommended System
Pentium or higher processor
32 MB RAM or more for
Windows 95 and 98
50 MB or more free disk space
for Windows 95, and 98
SVGA or better 24 bit color
® ®
Macintosh computers. You also
Recommended System
System 8.5.1 or later
14 MB or more of available memory
23 MB of available memory when
background printing is turned on.
(1,024K=1 MB).
About
7