Macintosh System Requirements - Epson Stylus Pro 7600 Printer Manual

4 | Introduction
Caution
Using an improperly
shielded USB cable—
especially a cable more
than 6.6 ft. (2 meters)
long—may cause the
printer to malfunction.
EPSON also provides technical assistance 24 hours a day through the World
Wide Web. You can reach EPSON Support at http://support.epson.com. At
this site, you can download drivers and other files, look at product
documentation, access troubleshooting information, and receive technical
advice through e-mail.
You can purchase ink cartridges, paper, and accessories from EPSON at
(800) 873-7766, or by visiting the EPSON Store at www.epsonstore.com
(U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral.

Macintosh System Requirements

To use your printer in either a standalone or peer-to-peer network
environment, your Macintosh
listed below:
OS 8.5.1 through 9.X
•
(OS X supported via RIP)
500 MHz or higher processor recommended
•
250MB of RAM
•
At least 25MB of free hard disk space to install the software, and at least
•
2GB of free hard disk space for processing files (8GB or more available
hard disk space recommended)
Quad-speed (4×) or faster CD-ROM or DVD drive for installing the
•
printer software
For USB connection: a compliant USB port and a shielded USB "AB"
•
cable from Series A (computer) to Series B (printer), up to 6.6 ft
(2 meters) long
For IEEE 1394 (FireWire) connection: the optional IEEE 1394 card
(described on page 2) and a shielded IEEE 1394 cable
For network connection: the optional Ethernet card (described on
page 2) and a compatible cable
® system should include the requirements
4