Epson Stylus Scan 2000 Manual page 13

11. In the following window, move the slider to the right or left until the two shades
of gray horizontal stripes match.
Note:
The gray stripes will not perfectly blend together; however, try to make the two
tones match as closely as possible.
12. Click OK to register the calibration setting.
13. When the EPSON Stylus Scan Drivers installation is complete, installation for
other applications begins automatically. Follow the on-screen instructions.
14. After all applications have been installed, a message appears asking you to restart
your computer. Click OK.
15. Restart the computer, then turn on the Stylus Scan by pressing its
Note:
Do not change the printer name (leave it as Stylus Scan 2000), otherwise your Stylus
Scan does not work correctly.
For Windows 98 with a USB connection
Before connecting the Stylus Scan to your Windows 98 computer using the USB port,
you must first install the Stylus Scan software. This section guides you through the
software installation and also includes instructions on connecting to your computer
using the USB port. Follow the steps below.
Note:
The USB connection cannot be used with Windows 95.
1.
Turn on the computer and start Windows 98.
Setting Up Your Stylus Scan 2000
d
P power button.
13