Printing On A Macintosh; Loading Paper - Epson Stylus Photo 890 Basic Manual

Printing on a Macintosh

This section describes the basic steps for printing on a Macintosh. (To print with
Windows, see page 8.)

Loading Paper

1. Make sure your printer and
computer are turned on.
2. Slide the left edge guide to
the right until the space
between the left and right
edge guides is just a little
wider than your paper. Then
load the paper against the
right edge guide.
3. Slide the left edge guide
against the paper.
Follow these guidelines when loading paper:
Load the printable side face up. It's usually whiter or brighter than the other side.
Load letterhead or preprinted paper into the printer top edge first.
Don't load paper above the arrow on the left edge guide.
14
See "Using Special EPSON Papers" on page 29 for instructions on
loading special media. For instructions on loading roll paper, see
page 42. For more details on loading different types of media, see
your electronic Reference Guide.
Don't load paper
Slide the left edge guide against the paper
above this arrow