Epson Stylus Scan 2000 Manual page 22

Selecting your EPSON Stylus Scan in the Chooser
After you install the printer software in your Macintosh, you need to open the Chooser
to select your Stylus Scan. You have to choose the Stylus Scan the first time you use it
or whenever you want to switch to another printer. Your Macintosh always prints using
the last printer selected.
Select Chooser from the Apple menu. Then click the Stylus Scan icon, and the
1.
port your Stylus Scan is connected to.
Click the Background Printing radio button to turn background printing on or off.
2.
When background printing is on, you can use your Macintosh while it is preparing
a document for printing. You must turn on background printing to use the EPSON
StatusMonitor utility to manage print jobs.
Close the Chooser.
3.
Notice for using USB Ports
If you connect several units of the same type, each unit is assigned a separate USB port
number, such as USB port 1, USB port 2, and so on. Performing any of the following
functions may cause the USB port numbers for the individual units to change.
Restarting your Macintosh
Turning the Stylus Scan off and on
Detaching and reconnecting the USB cable
Please check the assigned USB port number in the Chooser after performing any of
these functions.
Before turning on your USB hub (if necessary) and your Stylus Scan, turn on the
Macintosh and wait until the desktop appears.
When unplugging the USB cord, wait a few seconds before plugging it back in.
Otherwise, the Macintosh may not recognize your Stylus Scan and you may be unable
to print correctly.
22
Setting Up Your Stylus Scan 2000