Epson Stylus Scan 2000 Manual page 21

7.
The EPSON Screen Calibration utility starts automatically. In the following
window, move the slider to the right or left until the two shades of the gray
horizontal stripes match.
Note:
The gray stripes will not perfectly blend together; however, try to make the two
tones match as closely as possible.
Click OK to register the calibration setting. The computer restarts automatically.
8.
9.
Turn on the Stylus Scan by pressing its
10. Plug the appropriate end of the USB cable into the USB port at the back of the
Stylus Scan. (The end that fits the Stylus Scan has a different shape from the end
that fits the computer.)
Note:
To connect the Stylus Scan to a USB port, use a standard shielded USB cable.
11. Connect the other end of the cable to the computer's USB port.
Note:
If you have more than one USB hub connected to your computer, connect the
Stylus Scan to the hub that is connected directly to your computer. If the EPSON
Stylus Scan does not work properly when connected to the hub, connect it
directly to the computer's USB port.
Setting Up Your Stylus Scan 2000
d
P power button.
21