Installation - Compak E5 OD Instruction Manual

Table of Contents

Advertisement

7. INSTALLATION

7.1. General warnings
The person installing the grinder should carefully read this instruction manual
before installation. The installation of this machine should be completed by
qualified and authorized personnel, and all norms of safety and sanitation should be
followed.
7.2. Important warnings
The operator of the grinder should be a responsible adult, and a never a minor
or person incapable of safely using such equipment. When using the grinder,
the following precautions should be followed:
• No bare feet.
• No wet hands or feet.
• Do not submerge in water.
• Do not expose the grinder to sun or other atmospheric conditions.
• Do not place any type of object in the coffee entrance or exit while the grinder
is running. (It should be kept in mind that the cutting burrs continue turning for
a couple revolutions after the grinder is powered off).
• To disconnect the grinder, use the main power switch and never the power
cable, to avoid a possible short circuit.
K06307 | v. 12/07/2016 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E6 odE10conic odE8 odE10 master conic od

Table of Contents