Setting Hardware Protection - HP proliant ML110 Operation And Maintenance Manual

4. Set SW1-1 to the On position.
This will clear the CMOS memory.
5. Switch SW1-1 back to its default Off position.
6. Perform the post-installation instructions listed in Chapter 4.
7. During POST, press F2 to access the Setup Utility.
8. Press F9 to load the system default values.
9. Press F10 to save the changes you made and close the Setup Utility.

Setting Hardware Protection

You have the option to lock and unlock some of the hardware devices of the server. Do this to
set the access limit for these items.
1. In the Advanced menu screen, select the Hardware Protection parameter, then press
Enter.
The Hardware Protection submenu displays.
2. Select the hardware item you want to lock.
3. Press the plus (+) or minus (-) key to set the selected hardware to Lock.
4. Press F10 to save the changes you made and close the Setup Utility.
HP ProLiant ML110 Server Operations and Maintenance Guide
BIOS Setup Utility
5-11