4. Detach the old fan from its frame by unclasping the four retention latches on the frame
before pulling the fan away.
5. Install the new fan to its frame by aligning the pegs on the frame to their corresponding
notch on the fan, then firmly press the two together until the retention latches snap into
place.
6. Install a new system fan:
a. Align the tabs on the system fan frame to their chassis notch.
b. Slide the system fan downward to secure the tabs to the chassis.
HP ProLiant ML110 Server Operations and Maintenance Guide
Figure 4-28: Removing a system fan from its frame
Figure 4-29: Installing a system fan to its frame
System Configuration
4-27