To View The System Summary Screen; System Passwords - HP proliant ML110 Operation And Maintenance Manual

To View the System Summary Screen

You first need to enable the display of the System Summary Screen during bootup. Follow
the steps below.
1. In the Main menu screen, select Boot Features.
The Boot Features submenu is displayed.
2. Select Summary Screen.
3. Press the plus (+) or minus (-) key to set the parameter to Enabled.
4. Press F10 to save the changes you made and close the Setup Utility.
5. Reboot the server.
The System Summary Screen is displayed briefly at the end of POST.
6. Press the Pause/Break key to continue displaying the screen until another key is pressed.
7. Press any key to continue with the system bootup.

System Passwords

The Security menu lets you set system passwords that would provide different levels of
protection for the server. There are three types of passwords that you can set:
•
Supervisor password
Entering this password will allow the user to access and change all settings in the Setup
Utility.
HP ProLiant ML110 Server Operations and Maintenance Guide
Figure 5-2: System Summary Screen
BIOS Setup Utility
5-5