Hardware Diagnostic Software - HP proliant ML110 Operation And Maintenance Manual

System Diagnostics
After installing an accessory
1. Perform steps 1 through 3 of the pre-installation instructions in Chapter 4.
2. Remove the left-side cover as described in Chapter 4.
3. Check the following:
•
•
•
4. Observe the post-installation procedures described in Chapter 4.
5. Turn on the monitor.
6. If the server still does not work, repeat steps 1 through 2.
7. Remove all accessories, except the primary boot hard disk drive.
8. Repeat steps 4 through 5.
9. If the server now works, replace the boards and accessories one at a time to determine
which one is causing the problem.

Hardware Diagnostic Software

The purpose of hardware diagnostic software is to provide tools for checking hardware
problems. By design, diagnostic software executes simple tests of each hardware component.
Usually, such tests assure the hardware is not the source of server problems. This allows the
user to eliminate hardware as the cause of the problem and to focus on operating system
configuration parameters, network connections, and application software configuration
parameters as the source of the problem.
If hardware problems are confirmed, the diagnostic software program can sometimes detect
and diagnose the system or specific server component causing the problem. In addition,
hardware diagnostic software can capture information that allows support personnel to
quickly assess the condition of the server. In order to be effective, diagnostic software tools
must be used in the context of a wider troubleshooting procedure.
7-10
If you have installed an accessory board, verify that the board is firmly seated in its
slot and any switches or jumpers on the accessory board are properly set.
Refer to the documentation provided with the accessory board.
All internal cabling and connections are in their proper order.
If you have changed any switches on the mainboard, verify that each one is properly
set.
HP ProLiant ML110 Server Operations and Maintenance Guide