Sata Led Indicator Status - HP proliant ML110 Operation And Maintenance Manual

Addendum - SATA Configuration

SATA LED Indicator Status

When a SATA device is installed in the server, the SATA LED indicator located on the front
panel will change color to indicate the status of the SATA device. The table below shows the
nine possible SATA states.
Table 8-2: SATA LED Indicator Status
State
1
2
3
4
5
6
7
8
9
Note: Fast blinking – 8 Hz
8-6
Use this RAID driver diskette for Windows Server 2000 and Windows SBS or
Windows Server 2003 and Windows SBS 2003 with Promise FastTrack S150 SX4
card installation.
Single Dual
Color LED Color LED
Fast
blinking
Single
blink
Slow
blinking
Slow blinking – 4 Hz
Status Description
No power, offline, SATA drive is
not configured
Powered up, normal operation
Ongoing I/O disk activity
Predictive failure (S.M.A.R.T status), drive
cannot be access, offline
Online, no drive activity, predictive failure
(S.M.A.R.T status)
Ongoing drive activity, predictive failure
(S.M.A.R.T status)
Offline, no activity, critical fault condition
SATA drive selected
SATA drive rebuilding
HP ProLiant ML110 Server Operations and Maintenance Guide