NOTE:
you need to disable the wireless LAN.
USB Settings
Use the USB Settings menu to change printer settings affecting a USB
port.
NOTE:
USB Port
Purpose:
To change the USB settings on your printer. The change becomes effective
after the printer is turned off and then on.
Values:
Enable*
Disable
System Settings
Use the System Settings menu to configure the power saving mode,
time-out time, job log auto print, mm/inch setting, default paper size setting,
and low toner alert setting.
NOTE:
PowerSaver Time
Purpose:
To specify the time for transition to power saver mode.
Options:
Sleep
Deep Sleep
Downloaded from ManualsPrinter.com Manuals
When you use the USB connection and do not use the wireless connection,
Values marked by an asterisk (*) are the factory default menu settings.
Enables the USB interface.
Disables the USB interface.
Values marked by an asterisk (*) are the factory default menu settings.
5min.*
Specifies the time taken by the printer before it
enters Sleep mode after it finishes a job.
5–30min.
6min.*
Specifies the time taken by the printer before it
enters Deep Sleep mode after it goes into Sleep
1–6min.
mode.
Understanding the Printer Menus
223