Secure Settings; Panel Lock - Dell 1350cnw User Manual

1
* Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a
job. This uses less energy, but requires more warm-up time for the printer. Enter 5 if
your printer shares an electrical circuit with room lighting and you notice lights
flickering.
Select a high value if your printer is in constant use. In most circumstances, this
keeps the printer ready to operate with minimum warm-up time. Select a value
between 5 and 30 minutes for the Sleep mode if you want a balance between energy
consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the Sleep mode when it
receives data from the computer. You can also return the printer to the standby mode
by pressing any button on the operator panel.
2
* The default for mm/inch and Default Paper Size vary depending on country-specific
factory default.
USB Settings
Purpose:
To change the USB settings on your printer.
Values:
USB Port

Secure Settings

Panel Lock

Purpose:
To restrict access to Admin Menu and Report/List with a password, and
to set or change the password.
Values:
Panel Lock Set Restricts access to
New Password
Re-enter
Password
128
Dell Printer Configuration Web Tool
Downloaded from ManualsPrinter.com Manuals
To enable the USB interface on your printer.
Admin Menu
password.
Sets a password required to access
.
List
Enter the new password again to confirm.
and
Report/List
and
Admin Menu
with a
Report/