Configuring Wireless Settings - Dell 1350cnw User Manual

NOTE:
following steps:
•
•
7 Select the required items on the Printer Configuration, and then click
Install.
NOTE:
path and click OK on Installation Folder dialog box.
8 Click Finish to exit this tool.

Configuring Wireless Settings

This section describes how to configure wireless settings through Easy Setup
Navigator.
The specifications of wireless setting function are described below:
Item
Connectivity
Connectivity Standard
Bandwidth
Data Transfer Rate
Security
Wifi Protected Setup (WPS)
You can select a method to configure a wireless setting from the following:
Downloaded from ManualsPrinter.com Manuals
If the printer to be installed is not listed in Select Printer, try the
Click Refresh to update the information.
Click Add Printer, and then enter a port name (any alphanumeric string of
your choosing) and an existing IP address for the printer.
When you change installation folder, click Input, and then enter the
Specification
Wireless
IEEE 802.11b/802.11g/802.11n compliant
2.4 GHz
IEEE 802.11b mode: 11, 5.5, 2, 1 Mbps
IEEE 802.11g mode: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
IEEE 802.11n mode: 65 Mbps
64 (40-bit key)/ 128 (104-bit key) WEP , WPA-PSK
(TKIP , AES), WPA2-PSK (AES)(IEEE 802.1x
attestation function of WPA 1x non-corresponds)
Push Button Configuration (PBC), Personal
Identification Number (PIN)
Installing Printer Drivers on Computers Running Windows
69