Dell 1350cnw User Manual page 145

1
Ethernet*
Port Status
1
* This item is available only when the printer is connected with a wired network.
NOTE:
rebooted. When you change or configure the settings, click the Apply new settings
button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
Downloaded from ManualsPrinter.com Manuals
Ethernet
Settings
Current Ethernet Settings
MAC Address
LPD
Port9100
WSD
Bonjour
(mDNS)
E-Mail Alert
SNMP
LLTD
The settings in the Port Settings page will be valid only when the printer is
Auto Detects Ethernet transmission
rate and the duplex settings
automatically.
10Base-T Selects 10Base-T Half-Duplex
Half-Duplex as the default value.
10Base-T Selects 10Base-T Full-Duplex
Full-Duplex as the default value.
100Base-TX Selects 100Base-TX Half-
Half-Duplex Duplex as the default value.
100Base-TX Full-
Selects 100Base-TX Full-
Duplex
Duplex as the default value.
Displays the current settings of
Ethernet.
Displays the MAC address of the printer.
Specifies whether to enable LPD.
Specifies whether to enable Port9100.
Specifies whether to enable the WSD port.
Specifies whether to enable the Bonjour(mDNS)
feature.
Specifies whether to enable the E-Mail Alert
feature.
Specifies whether to enable the SNMP .
Specifies whether to enable LLTD.
Dell Printer Configuration Web Tool
141