Dell 1350cnw User Manual page 300

Action
1
Adjust the transfer bias.
Launch the Tool Box, click Chart Print on the
1
Diagnosis tab.
Click the Ghost Configuration Chart button.
2
The Ghost Configuration Chart is printed.
Launch the Tool Box, click BTR Refresh
3
Mode on the Printer Maintenance tab.
Check the check box next to On, and then
4
click Apply New Settings.
Click Chart Print on the Diagnosis tab.
5
Click the Ghost Configuration Chart button.
6
The Ghost Configuration Chart is printed.
Is the problem recovered?
2
The print media surface may be uneven. Try
changing the Paper Type setting in the printer
driver. For example, change the plain paper to
thick.
On the Paper/Output tab in Printing
1
Preferences of the printer driver, change the
Paper Type setting.
Is the problem recovered?
3
Adjust the fuser temperature.
Launch the Tool Box, and click Adjust Fuser
1
on the Printer Maintenance tab.
Adjust the fixing temperature by turning up
2
the value for your printing media.
Click Apply New Settings.
3
Click close box to exit Tool Box.
4
Is the problem recovered?
4
If you use non-recommended print media, use
the print media recommended for the printer.
Is the problem recovered?
296
Troubleshooting
Downloaded from ManualsPrinter.com Manuals
Yes No
The task is Go to action 2.
complete.
The task is Go to action 3.
complete.
The task is Go to action 4.
complete.
The task is Contact Dell.
complete.