Arming Your System When Leaving Home - Honeywell LYNX Touch 7000 Owner's Manual

When arming your system, first check the LED next to the DOWN arrow. If the LED is lit,
press the DOWN arrow to view open protection. Close protection before arming. See
the Force Arming Your System section to Arm your system around an open protection
point.
What You Do
View user keypad
Press
Press
or
to leave
NOTE: The EXIT NOW prompt and warning tone mean that the exit delay time
programmed for your system is now in effect and you should leave through a
designated door before the time expires to avoid causing an accidental
alarm. The warning tone rate increases the last ten seconds of the delay
period, indicating that an alarm is about to be reported. The EXIT NOW
prompt disappears when the delay time expires.

Arming Your System When Leaving Home

What You See
THE SMITH'S
1– AWAY ALL ON
2– AWAY PARTIAL
AWAY ALL ON
EXIT NOW
or
AWAY PARTIAL
EXIT NOW
17
What Happens
The disarmed mode is
displayed.
M6942
The mode menu displays the
first two selections:
1-AWAY ALL ON turns on both
M6943
your perimeter and interior
protection.
2-AWAY PARTIAL turns on any
protection you have
predetermined.
The new mode displays. The
EXIT NOW prompt also
displays. A warning tone sounds
M6944A
during the exit delay period.
M6945
74-2760—1