My System; Quick Reference Chart - Honeywell LYNX Touch 7000 Owner's Manual

The Honeywell 7000 has several features that can be programmed to meet your
specific needs. During the installation process, you decided on how you wanted these
features to operate. This section details your selections. In addition, a Quick Reference
Chart is provided explaining the operation of the main functions of your system.
What You Want To Do
Cancel a false alarm
Completely disarm security except
for 24-hour protected points.
Select a mode.
Select a security option.
Call for fire assistance*
Call for police assistance*
To send a special alarm*
When a burglar alarm occurs, the exterior siren or bell delays for 15 seconds before sounding.
When a fire alarm occurs, the siren or bell sounds instantly. When a police or special alarm
occurs, the exterior siren or bell sounds instantly, unless programmed to be silent.
* If you do not have a monitored system, these features only sound an alarm at your house if
they have been programmed to be audible.
IMPORTANT
If you have a monitored system and the burglar alarm portion of your system is
triggered, the Honeywell Customer Service Center receives a signal and will
take action based on instructions you pre-determined at the time of installation.
Typically, we will call you first to see if you unintentionally tripped the alarm. Next,
we will dispatch the police if we are unable to determine that the alarm was
unintentional. Then we notify the first available person on your Call List. We do
not call you first if the alarm is for Fire or if you have pressed the POLICE button.
If you do not have a monitored system, an alarm sounds in your home and a
siren or bell sounds outside (when installed), but no signal is sent to the
Customer Service Center.
What Action You Take
1. Enter your passcode.
2. Call Customer Service Center, give them your passcard
number or code word, and tell them what happened.
Enter your passcode. Do not push MODES first. Security is
disarmed.
1. Press
2. Press the arrow keys to scroll through choices.
3. Enter number of choice and follow prompts.
1. Press
2. Make selections by entering the appropriate number
and follow the prompts.
Press
Press
Press
11

MY SYSTEM

Quick Reference Chart

for two seconds.
for two seconds.
for two seconds.
74-2760—1